Sirius Amos Hotbird

List of frequencies and television channels at satellites Amos 3 and Amos 7 at 4° West. (Sirius) 4.8º East.

Setting up a satellite dish on the 3 satellite Amos - Astra (Sirius) - Hotbird I think everyone wants to see a lot of TV channels from a satellite dish, and the cost of materials, packaging and installation should be minimal. All these conditions corresponds to a satellite TV with 3 satellite: Hot Bird 13 ° e, Astra (Sirius) 5 ° e, Amos 4 ° w - is an appropriate variat to view most free Russian-speaking channels ( 90), as well as foreign (about 2000). This set of equipment for the installation consists of a satellite dish, 2 additional plastic fasteners (called Multifeed) side converters, 3-converters (heads) to the Ku-diappazon, support or fixed to the mast fixing the antenna DiSEqS (Diseko) -komutatora heads, RF cable and 75-ohm F - connector. Preparatory work: - Before installing the antenna it is necessary to collect and equip additional fixtures and convectors.

Please fasten an arc to the mirror at the same time comply with all the geometric dimensions - by tightening bolts, and then install the bracket and mounting bracket (Multifeed) convectors. Ccnp route ppt free download. The first set mount convector Hot Bird 13E- this fixture will be closer to the mirror, antenna, set the second mount head Amos 4W and put on the central axis of the third Astra convector 5E, baits their respective fasteners. - Cut 3 segment of the RF cable meter-long (possible) put on the ends of the cable F-connector and isolate the metal part, then fasten the cable to the 3 segment pereklyuatelyu DiSEqC, in our case we use 4 Port Diseko (DiSEqC 1.0). Since the cable we connect in last turn, after setting up the antenna, it is at this stage of their preparation, it is desirable to sign or mark on the following recommendations: 1 DiSEqC input to connect a cable head Sirius 5E, 2 input to connect with convector Amos 4W and 3 input is connected to the head The mood on the satellite Hot Bird 13E. In the end, we will: Choose a location for the antenna: The area where our antenna will be installed should be free in the southwest naprvlenii (South-West) from trees, houses, stopped structures which may interfere with the signal from the satellite to the receiver plate. This place can be a wall of the building, the roof of the building, mast or tower. If mounted on a wall of the building (the preferred option), you must first secure the bracket with anchor bolts and dowels suitable size.

On the bracket already prepared to sit down before a satellite dish, but without Diseko. Setting a satellite dish: The first step is to set up a satellite dish on the tsetnralny Astra (Sirius) then compress the bolts of the angle of rotation and angle plates, as in setting up the antenna on the Hotbird satellite Amos and they do not participate. With the help of a piece of cable connect the receiver to the central convector Astra (Sirius), and set up our dish to the satellite Astra (Sirius). To set it's best to prepare in advance equipment for adjustment of satellite antennas: it can be as a special instrument SatFinder, and satellite receiver (such as Openbox X-800) with the prepared transponder frequency and connected portable TV.